名称: IEC60309插头2P+E                   型号:IEC60309插头2P+E

品牌产地: 中国                                    电流：10A-125A

电压：1000V以下                               频率：50HZ

相关标准: GB/T11918 标准执行,接受CCC认证

适用范围:国标16A插座或万用/多用插座

产品简介:

       PDU工业插头插座,1000V以下,10-125A工业用插头、插座和电缆连接器、组合插座箱、非标电源箱等，按照ISO9001质量体系的标准.实施质量控制,并严格执行中国国家标准GB/T11918、GB/T11919等同采用IEC309国际标准,产品设计独特，结构合理，可保证接插时插杆与插套之间极低的接触电阻，外壳颜色表示使用不同的电压和频率。不同型号插头、插座因插头位置、直径、极数不相同而防止误插,设计防脱落装置,具有优异的电气绝缘性能和介质强度，耐冲击，可稳定地工作在较低或较高温度的室内或室外环境，有IP44、IP55、IP67等不同程度的防水等级，广泛用于工厂电源配置，机械设备，建筑工地、电子、港口、码头、矿场，给排水及污水处理舞台灯光机房等工程。

Electrical parameters：

Current：10A Voltage：250V Frequency：50Hz Introduction： The plug and socket pattern for use in China is specified in publications GB 2099-1 and GB 1002-1. The Chinese plug is a 3-wire, grounded plug rated at 10A/250VAC used in Class I applications in China. The plug is nearly identical to the Australian plug pattern except that the contact pins of the Chinese plug are slightly longer (1mm) and the plug body dimensions vary slightly. The cordsets can be terminated with a variety of IEC 60320 connectors and have a maximum output rating of 10A. China requires that plugs, connector couplers, and cable used in the construction of the Chinese cordsets be tested and approved by the China Commission for Conformity Certification of Electrical Equipment (CCEE) and must bear the CCC mark.